Figure 2-21 Inserting The Cma Rail Extension Into The Back Of The Left Slide Rail - Sun Microsystems StorageTek 5320 Getting Started Manual

Caution – Support the CMA during this installation. Do not allow the assembly to
hang by its own weight until it is secured by all three attachment points.
1. At the back of the rack, plug the CMA rail extension into the end of the left
sliding rail assembly ( ).
FIGURE 2-21
The tab at the front of the rail extension clicks into place.
Inserting the CMA Rail Extension Into the Back of the Left Slide Rail
FIGURE 2-21
The right sides of the two CMA arms have hinged extensions. On the manufacturer's
instruction sheet, the smaller extension is called the CMA Connector for Inner
Member. It attaches to the right mounting bracket. The larger extension is called the
CMA Connector for Outer Member, and attaches to the right sliding rail.
42 Sun StorageTek 5320 NAS Appliance and Gateway System Getting Started Guide • May 2006