Sun Microsystems StorEdge 5310 User Manual
  1. Manuals
  2. Brands
  3. Sun Microsystems Manuals
  4. Storage
  5. StorEdge 5310
  6. User manual
Sun Microsystems StorEdge 5310 User Manual

Sun Microsystems StorEdge 5310 User Manual

Network-attached storage solution
Hide thumbs Also See for StorEdge 5310:
Table of Contents

Advertisement

Quick Links

Download this manual
Sun StorEdge
5310 NAS
™
Appliance Hardware Installation,
Configuration, and User Guide
Sun Microsystems, Inc.
www.sun.com
Part No. 819-0880-12
May 2005, Revision A
Submit comments about this document at: http://www.sun.com/hwdocs/feedback

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the StorEdge 5310 and is the answer not in the manual?

Questions and answers

Related Manuals for Sun Microsystems StorEdge 5310

Summary of Contents for Sun Microsystems StorEdge 5310

  • Page 1 Sun StorEdge 5310 NAS ™ Appliance Hardware Installation, Configuration, and User Guide Sun Microsystems, Inc. www.sun.com Part No. 819-0880-12 May 2005, Revision A Submit comments about this document at: http://www.sun.com/hwdocs/feedback...
  • Page 2 Copyright 2005 Sun Microsystems, Inc., 4150 Network Circle, Santa Clara, Californie 95054, Etats-Unis. Tous droits réservés. Sun Microsystems, Inc. a les droits de propriété intellectuels relatants à la technologie qui est décrit dans ce document. En particulier, et sans la limitation, ces droits de propriété...
  • Page 3 Radio/TV Interference Statement This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
  • Page 4 Sun StorEdge 5310 NAS Appliance Hardware Installation, Configuration, and User Guide • May 2005...

  • Page 5: Table Of Contents

    Contents Introduction 1 Sun StorEdge 5310 NAS Appliance Technology: An Introduction 1 Sun StorEdge 5310 NAS Appliance Features 2 Supported File Access Protocols 2 Network Security/Protocols 2 Supported Clients 3 Network Connection 3 Automatic IP Address Assignment 3 RAID Controllers 3...
  • Page 6 Before You Begin the Installation 39 Unpacking the Units 41 Sun StorEdge 5310 Cluster Front and Back Panels 42 Sun StorEdge 5300 RAID EU Controller Enclosure 44 Sun StorEdge 5310 NAS Appliance Hardware Installation, Configuration, and User Guide • May 2005...
  • Page 7 Health-Monitoring and Network Cables 64 Connecting to Copper Fast Ethernet or Gigabit Ethernet Networks 65 Connecting to Optional Optical Gigabit Ethernet Networks 65 Powering On the Sun StorEdge 5310 Cluster, Controller Enclosure, and Expansion Enclosures 66 Powering on the Expansion Enclosures 67...
  • Page 8 Power Supplies 85 Specifications 87 Sun StorEdge 5310 NAS Appliance and Sun StorEdge 5300 RAID EU and EU Technical Specifications 87 Glossary 89 Index 93 viii Sun StorEdge 5310 NAS Appliance Hardware Installation, Configuration, and User Guide • May 2005...
  • Page 9 FIGURE 2-1 Sun StorEdge 5310 NAS Appliance with Faceplate Removed 11 FIGURE 2-2 Sun StorEdge 5310 NAS Appliance Back Panel with Single HBA Card 11 FIGURE 2-3 Sun StorEdge 5300 RAID EU Controller Enclosure Front, With Fibre Channel Disk FIGURE 2-4...
  • Page 10 Controller Enclosure Back Panel 68 FIGURE 3-22 Connecting the Sun StorEdge 5310 Cluster AC Power Cables 69 FIGURE 3-23 Power Button and Front Panel Detail 70 FIGURE 3-24 Sun StorEdge 5310 NAS Appliance Hardware Installation, Configuration, and User Guide • May 2005...
  • Page 11 Sun StorEdge 5310 NAS Appliance Power Supply 77 FIGURE 4-2 Power Switch and Front Panel Detail 78 FIGURE 4-3 Sun StorEdge 5310 NAS Appliance Back Panel with Single HBA Card 80 FIGURE 4-4 Sun StorEdge 5310 NAS Appliance VGA Port 82 FIGURE 4-5...
  • Page 12 Sun StorEdge 5310 NAS Appliance Hardware Installation, Configuration, and User Guide • May 2005...

  • Page 13: Introduction

    Note – The general Sun StorEdge 5310 NAS Appliance features described in this chapter also apply to the Sun StorEdge 5310 Cluster. For a specific description of Sun StorEdge 5310 Cluster technology, refer to "Sun StorEdge 5310 Cluster Technology: An Introduction"...

  • Page 14: Sun Storedge 5310 Nas Appliance Features

    Windows Active Directory Service (ADS) support Windows Dynamic DNS support Windows-compatible Kerberos (v5) security Windows-compatible Lightweight Directory Access Protocol (LDAP) LDAP authentication for NFS Network Time Protocol (NTP) Sun StorEdge 5310 NAS Appliance Hardware Installation, Configuration, and User Guide • May 2005...

  • Page 15: Supported Clients

    User and Group Quotas Setup and Configuration Web-Based User Interface for system configuration and administration Command Line Interface for for use by service personnel (refer to the Sun StorEdge 5310 NAS Appliance Software Installation, Configuration, and User Guide) Chapter 1 Introduction...

  • Page 16: Client Data Backup

    The Sun StorEdge 5310 Cluster package includes a printed Sun StorEdge 5310 Cluster Setup Instructions. Note – The Setup Poster pertains to the non-clustered Sun StorEdge 5310 NAS and is not intended for setting up the Sun StorEdge 5310 Cluster system.

  • Page 17: Conventions Used In This Manual

    Conventions Used in This Manual This manual was designed to make it easy for you to find the information you need quickly. To help guide you on your way, familiarize yourself with the following icons. Conventions Used in Guide TABLE 1-1 Indicates steps or procedures that could result in loss of data or damage to hardware if not followed.

  • Page 18: Contacting Technical Support

    Sun StorEdge 5300 EU expansion enclosures. Chapter Four: Using the Sun StorEdge 5310 NAS Appliance—Describes how to use the Sun StorEdge 5310 NAS Appliance and its components. It is organized into two sections: internal components and external components.

  • Page 19: Installing The Sun Storedge 5310 Nas Appliance

    NAS Appliance Note – This chapter contains single-head Sun StorEdge 5310 NAS Appliance installation instructions only. If you are installing a Sun StorEdge 5310 Cluster, refer to Chapter 3 for instructions. This chapter provides comprehensive instructions for installing the Sun StorEdge 5310 NAS Appliance, the Sun StorEdge 5300 RAID EU controller enclosure, and the optional Sun StorEdge 5300 EU expansion enclosures.

  • Page 20: Before You Begin

    Two Optical Fiber cables Four AC power cords (These must be ordered separately from Sun Microsystems.) Rail-Mounting kits (These must be ordered separately from Sun Microsystems.) Sun StorEdge 5310 NAS Appliance Hardware Installation, Configuration, and User Guide • May 2005...

  • Page 21: Unpacking The Units

    If you purchased one or more expansion enclosures, take a moment to make sure that each package includes the following listed items. Should any of the items be damaged or missing, contact your Sun Microsystems sales representative or reseller immediately.
  • Page 22 Two Optical Fiber cables For each Sun StorEdge 5300 EU expansion enclosure: Two power cables Two Active Copper cables To obtain qualified cables, consult your Sun Microsystems sales representative. Sun StorEdge 5310 NAS Appliance Hardware Installation, Configuration, and User Guide • May 2005...

  • Page 23: Sun Storedge 5310 Nas Appliance Front And Back Panels

    SCSI port to optional tape drive USB (reserved) AC power supply 1 AC power plugs Built-in (reserved) NICs Keyboard (maintenance use) (maintenance use) Sun StorEdge 5310 NAS Appliance Back Panel with Single HBA Card FIGURE 2-3 Chapter 2 Installing the Sun StorEdge 5310 NAS Appliance...

  • Page 24: Sun Storedge 5300 Raid Eu Controller Enclosure

    Power switch Power switch AC power plug AC power plug Tray number thumb wheel Sun StorEdge 5300 RAID EU Controller Enclosure Back Panel FIGURE 2-5 Sun StorEdge 5310 NAS Appliance Hardware Installation, Configuration, and User Guide • May 2005...

  • Page 25: Sun Storedge 5300 Eu Expansion Enclosure

    To controller enclosure To controller enclosure Power switch AC power plug Power switch AC power plug Tray number thumb wheel Sun StorEdge 5300 EU Expansion Enclosure Back Panel FIGURE 2-7 Chapter 2 Installing the Sun StorEdge 5310 NAS Appliance...

  • Page 26: Rackmounting The Sun Storedge 5310 Nas Appliance, Controller Enclosure, And Expansion Enclosures

    Caution – The Sun StorEdge 5310 NAS Appliance, controller enclosure, and expansion enclosures contain several components sensitive to static-electrical discharge. Surges of static electricity (caused by shuffling your feet across a floor and Sun StorEdge 5310 NAS Appliance Hardware Installation, Configuration, and User Guide • May 2005...
  • Page 27 0.25 inch. The nuts on the chassis should be installed with a 10 in/lb torque. The safe ground conductor provides proper grounding only for the Sun StorEdge 5310 NAS Appliance. You must provide additional, proper grounding for the rack and other devices installed in it.

  • Page 28: Unit Placement In The Rack

    Next install the rest of the expansion enclosures (if any) for the first controller enclosure. Leave room for any planned expansion. Then install the first Sun StorEdge 5310 NAS Appliance Hardware Installation, Configuration, and User Guide • May 2005...

  • Page 29: Installing The Units

    If room remains in the cabinet, repeat for the expansion enclosures for the next controller enclosure. Finally, install the Sun StorEdge 5310 NAS Appliance. Starting at the bottom distributes the weight correctly in the cabinet. Installing the Units To install the units in a rack, follow the instructions included with the rack and the rackmount kits.

  • Page 30: Figure 2-9 Tray Id Switch

    When you have finished installing all units, connecting their power cables, and setting the tray IDs, you are ready to connect the Sun StorEdge 5310 NAS Appliance to the controller enclosure and the controller enclosure to the (optional) expansion enclosures as described in the next section.

  • Page 31: Connecting The Units

    Connecting the Units This section describes how to cable the Sun StorEdge 5310 NAS Appliance to the controller enclosures and the controller enclosures to the optional expansion enclosures for several different configurations. Connecting the Sun StorEdge 5310 NAS Appliance to Controller Enclosures The Sun StorEdge 5310 NAS Appliance connects to each controller enclosure with a pair of optical fiber cables.

  • Page 32: Figure 2-11 Connecting The Sun Storedge 5310 Nas To The Controller Enclosure

    For a Sun StorEdge 5310 NAS Appliance with one dual-port HBA card ( FIGURE 2-11 1. Connect the HBA port 2 on the Sun StorEdge 5310 NAS Appliance to the Controller A host 1 port. 2. Connect the HBA port 1 on the Sun StorEdge 5310 NAS Appliance to the Controller B host 1 port.

  • Page 33: Figure 2-12 Connecting Two Hba Cards To The Controller Enclosure

    FIGURE 2-13 controller enclosures to the Sun StorEdge 5310 NAS Appliance. Note – The Sun StorEdge 5310 NAS Appliance must have two HBA cards to connect to two controller enclosures. Caution – One array can contain fibre channel disk drives (in the controller enclosure and expansion enclosures) and the other array can contain SATA disk drives (in the expansion enclosures only).

  • Page 34: Figure 2-13 Connecting The Sun Storedge 5310 Nas Appliance To Two Controller Enclosures

    Controller B Controller A First controller enclosure Controller B Controller A Second controller enclosure Sun StorEdge 5310 NAS Appliance to Two Controller Connecting the FIGURE 2-13 Enclosures Sun StorEdge 5310 NAS Appliance Hardware Installation, Configuration, and User Guide • May 2005...

  • Page 35: Connecting Controller Enclosures To Expansion Enclosures

    EU S (SATA) expansion enclosures attached to a controller enclosure. Note – A maximum of seven EU F or eight EU S expansion enclosures can be attached to a controller enclosure. Chapter 2 Installing the Sun StorEdge 5310 NAS Appliance...

  • Page 36: Figure 2-15 Controller Enclosure And One Expansion Enclosure Cable Interconnection

    B side port 2 of the expansion enclosure. Note – The A side port 2 and B side port 1 of the expansion enclosure remain empty. Sun StorEdge 5310 NAS Appliance Hardware Installation, Configuration, and User Guide • May 2005...

  • Page 37: Figure 2-16 Controller Enclosure And Two Expansion Enclosures Cable Interconnection

    2 and the B side port 2 of expansion enclosure 1. Note – The A side port 2 of expansion enclosure 2 and the B side port 1 of expansion enclosure 1 remain empty. Chapter 2 Installing the Sun StorEdge 5310 NAS Appliance...

  • Page 38: Figure 2-17 Controller Enclosure And Three Expansion Enclosures Cable Interconnection

    5. Connect one Active Copper cable between the B side port 1 of expansion enclosure 3 and the B side port 2 of expansion enclosure 2. Sun StorEdge 5310 NAS Appliance Hardware Installation, Configuration, and User Guide • May 2005...
  • Page 39 2 and the B side port 2 of expansion enclosure 1. Note – The A side port 2 of expansion enclosure 3 and the B side port 1 of expansion enclosure 1 remain empty. Chapter 2 Installing the Sun StorEdge 5310 NAS Appliance...

  • Page 40: Figure 2-18 Controller Enclosure And Seven Expansion Enclosures Cable Interconnection

    1. Connect one Active Copper cable between the A side expansion port of the controller enclosure and the A side port 1 of expansion enclosure 1. Sun StorEdge 5310 NAS Appliance Hardware Installation, Configuration, and User Guide • May 2005...
  • Page 41 B sides of all expansion enclosures are interconnected with Active Copper cables. Note – The A side port 2 of expansion enclosure 7 and the B side port 1 of expansion enclosure 1 remain empty. Chapter 2 Installing the Sun StorEdge 5310 NAS Appliance...

  • Page 42: Connecting To The Network

    Local Area Network (LAN) to the Port emc1 or the Port emc2 on the rear of the Sun StorEdge 5310 NAS Appliance. Port emc1 Port emc2 Connecting to a Fast Ethernet or Gigabit Network FIGURE 2-19 Sun StorEdge 5310 NAS Appliance Hardware Installation, Configuration, and User Guide • May 2005...

  • Page 43: Connecting To Optional Optical Gigabit Ethernet Networks

    NIC and optical Gigabit port locations. FIGURE 2-20 To connect the Sun StorEdge 5310 NAS Appliance to an optical Gigabit network, you must have the optional add-in optical Gigabit Ethernet connections. Connect an LC cable from the network to the right (Port emf3) optical Gigabit Ethernet connector on the rear of the Sun StorEdge 5310 NAS Appliance.

  • Page 44: Powering On The Expansion Enclosures

    AC power cables to the back of each expansion enclosure (see FIGURE 2-21 3. Connect the other end of the two power cables to two separate AC power sources. Sun StorEdge 5310 NAS Appliance Hardware Installation, Configuration, and User Guide • May 2005...

  • Page 45: Powering On The Controller Enclosures

    To turn on each controller enclosure: 1. Verify that all cables between the Sun StorEdge 5310 NAS Appliance, controller enclosures, and expansion enclosures are properly secured according to the instructions in "Connecting the Sun StorEdge 5310 NAS Appliance to Controller Enclosures"...

  • Page 46: Powering On The Sun Storedge 5310 Nas Appliance

    Sun StorEdge 5310 NAS Appliance is connected to the network, turn on the Sun StorEdge 5310 NAS Appliance by using the following procedure: 1. Verify that the power button is in the Off position. 2. Connect one end of the AC power cable to the Sun StorEdge 5310 NAS Appliance (see FIGURE 2-23 3.

  • Page 47: Figure 2-23 Connecting The Sun Storedge 5310 Nas Appliance Ac Power Cables

    Power Button and Front Panel Detail FIGURE 2-24 Refer to the hardcopy Setting Up the Sun StorEdge 5310 NAS Appliance poster or to the Quick Reference Manual for network and system configuration instructions. Chapter 2 Installing the Sun StorEdge 5310 NAS Appliance...
  • Page 48 Sun StorEdge 5310 NAS Appliance Hardware Installation, Configuration, and User Guide • May 2005...

  • Page 49: Installing The Sun Storedge 5310 Cluster

    EU expansion enclosures. It has been designed to help you: Check for required components Unpack the units Rackmount the units Connect the units Power on each unit Assign IP addresses Configure the cluster Note – The Sun StorEdge 5310 Cluster ships with the operating system installed.

  • Page 50: Sun Storedge 5310 Cluster Technology: An Introduction

    (NAS) services, using an active/active pair of servers in a system configuration with no single point of failure. The servers in a Sun StorEdge 5310 Cluster system are similar to those used in stand-alone Sun StorEdge 5310 NAS Appliance configurations, with two key exceptions: High Availability (HA) servers are sold as matched pairs, identified as “-H1”...

  • Page 51: Before You Begin The Installation

    Before You Begin the Installation Before proceeding with the hardware installation, take a moment to make sure your Sun StorEdge 5310 Cluster package includes the following listed items. Should any of the items be damaged or missing, contact your Sun Microsystems sales representative or reseller immediately.
  • Page 52 Caution – All expansion enclosures attached to a controller enclosure must be of the same type (all EU F or all EU S). Sun StorEdge 5310 NAS Appliance Hardware Installation, Configuration, and User Guide • May 2005...

  • Page 53: Unpacking The Units

    Two power cables Two Optical Fiber cables For each Sun StorEdge 5300 EU expansion enclosure: Two power cables Two Active Copper cables To obtain qualified cables, consult your Sun Microsystems sales representative. Chapter 3 Installing the Sun StorEdge 5310 Cluster...

  • Page 54: Sun Storedge 5310 Cluster Front And Back Panels

    Sun StorEdge 5310 Cluster Front and Back Panels Sun StorEdge 5310 Cluster Front View FIGURE 3-1 Sun StorEdge 5310 Cluster with Faceplate Removed FIGURE 3-2 Sun StorEdge 5310 NAS Appliance Hardware Installation, Configuration, and User Guide • May 2005...

  • Page 55: Figure 3-3 Sun Storedge 5310 Cluster Back Panel With Two Hba Cards

    AC power supply 1 and 2 (maintenance NICs use) SCSI port to optional tape drive Dual port HBA cards to controller enclosures Sun StorEdge 5310 Cluster Back Panel with Two HBA Cards FIGURE 3-3 Chapter 3 Installing the Sun StorEdge 5310 Cluster...

  • Page 56: Sun Storedge 5300 Raid Eu Controller Enclosure

    Power switch Power switch AC power plug AC power plug Tray number thumb wheel Sun StorEdge 5300 RAID EU Controller Enclosure Back Panel FIGURE 3-5 Sun StorEdge 5310 NAS Appliance Hardware Installation, Configuration, and User Guide • May 2005...

  • Page 57: Sun Storedge 5300 Eu Expansion Enclosure

    Note – The Sun StorEdge 5300 EU S expansion enclosures contain only SATA disk drives. To controller enclosure To controller enclosure Power switch AC power plug Power switch AC power plug Traynumber thumb wheel Sun StorEdge 5300 EU Expansion Enclosure Back Panel FIGURE 3-7 Chapter 3 Installing the Sun StorEdge 5310 Cluster...

  • Page 58: Rackmounting The Sun Storedge 5310 Cluster, Controller Enclosures, And Expansion Enclosures

    Appendix to determine the appropriate AC branch circuit size for the quantity of units in your configuration and your operating voltage. Always follow your local electrical codes for loading circuits. Sun StorEdge 5310 NAS Appliance Hardware Installation, Configuration, and User Guide • May 2005...
  • Page 59 Caution – The Sun StorEdge 5310 Cluster, controller enclosure, and expansion enclosures contain several components sensitive to static-electrical discharge. Surges of static electricity (caused by shuffling your feet across a floor and touching a metallic surface, for example) can cause damage to electrical components. For this reason, it is important that proper packaging and grounding techniques be observed.

  • Page 60: Unit Placement In The Rack

    5300 EU expansion enclosure (bottom) Rear View - two controller enclosures, single expansion enclosure Recommended Rack Mounting Order for Two Controller Enclosures and One FIGURE 3-8 Expansion Enclosure Sun StorEdge 5310 NAS Appliance Hardware Installation, Configuration, and User Guide • May 2005...

  • Page 61: Installing The Units

    The power-on sequence is described in detail in "Powering on the Expansion Enclosures" on page 67, "Powering on the Controller Enclosures" on page 67, and "Powering on the Sun StorEdge 5310 Cluster" on page 68. Chapter 3 Installing the Sun StorEdge 5310 Cluster...

  • Page 62: Setting The Tray Id

    ID 01. The second expansion enclosure is tray ID 02. The tray ID increments by 01 for each expansion enclosure and controller enclosure installed in the cabinet. Sun StorEdge 5310 NAS Appliance Hardware Installation, Configuration, and User Guide • May 2005...

  • Page 63: Connecting The Sun Storedge 5310 Cluster, Controller Enclosures, And Expansion Enclosures

    When you have finished installing all units, connecting their power cables, and setting the tray IDs, you are ready to connect the Sun StorEdge 5310 Cluster to the controller enclosures and the controller enclosures to the (optional) expansion enclosures as described in the next section.

  • Page 64: Figure 3-10 Sun Storedge 5310 Cluster Hba Cards And Controller Enclosure Ports

    Sun StorEdge 5310 Cluster HBA Cards and Controller Enclosure Ports FIGURE 3-10 Note – HBA cards are inserted only in the far left on the low profile riser assembly of the Sun StorEdge 5310 Cluster. Sun StorEdge 5310 NAS Appliance Hardware Installation, Configuration, and User Guide • May 2005...

  • Page 65: Figure 3-11 Connecting Pairs Of Hba Cards To One Controller Enclosure

    Use the instructions in this section if you are connecting one controller enclosure to the Sun StorEdge 5310 Cluster. 1. Connect the HBA port 2 of the first HBA card on the Sun StorEdge 5310 Cluster server H1 to the Controller A host 1 port.
  • Page 66 EU S (SATA) expansion enclosures attached to a controller enclosure. 1. Connect the HBA port 2 of the first HBA card on the Sun StorEdge 5310 Cluster server H1 to the Controller A host 1 port on the first controller enclosure.

  • Page 67: Figure 3-12 Connecting The Sun Storedge 5310 Cluster To Two Controller Enclosures

    4. Connect the HBA port 1 of the second HBA card on the Sun StorEdge 5310 Cluster server H1 to the Controller A host 1 port on the second controller enclosure. Step 1 Step 2 Sun StorEdge 5310 Cluster server H1...

  • Page 68: Figure 3-13 Connecting The Sun Storedge 5310 Cluster To Two Controller Enclosures

    8. Connect the HBA port 1 of the second HBA card on the Sun StorEdge 5310 Cluster server H2 to the Controller A host 2 port on the second controller enclosure. Sun StorEdge 5310 Cluster server H1 Step 5 Step 6...

  • Page 69: Connecting The Controller Enclosures To Expansion Enclosures

    EU S (SATA) expansion enclosures attached to a controller enclosure. Note – A maximum of seven EU F or eight EU S expansion enclosures can be attached to a controller enclosure. Chapter 3 Installing the Sun StorEdge 5310 Cluster...

  • Page 70: Figure 3-15 Controller Enclosure And One Expansion Enclosure Cable Interconnection

    B side port 2 of the expansion enclosure. Note – The A side port 2 and B side port 1 of the expansion enclosure remain empty. Sun StorEdge 5310 NAS Appliance Hardware Installation, Configuration, and User Guide • May 2005...

  • Page 71: Figure 3-16 Controller Enclosure And Two Expansion Enclosures Cable Interconnection

    2 and the B side port 2 of expansion enclosure 1. Note – The A side port 2 of expansion enclosure 2 and the B side port 1 of expansion enclosure 1 remain empty. Chapter 3 Installing the Sun StorEdge 5310 Cluster...

  • Page 72: Figure 3-17 Controller Enclosure And Three Expansion Enclosures Cable Interconnection

    2 and the A side expansion port 1 of expansion enclosure 3. 4. Connect one Active Copper cable between the B side expansion port of the controller enclosure and B side port 2 of expansion enclosure 3. Sun StorEdge 5310 NAS Appliance Hardware Installation, Configuration, and User Guide • May 2005...
  • Page 73 2 and the B side port 2 of expansion enclosure 1. Note – The A side port 2 of expansion enclosure 3 and the B side port 1 of expansion enclosure 1 remain empty. Chapter 3 Installing the Sun StorEdge 5310 Cluster...

  • Page 74: Figure 3-18 Controller Enclosure And Seven Expansion Enclosures Cable Interconnection

    1. Connect one Active Copper cable between the A side expansion port of the controller enclosure and the A side port 1 of expansion enclosure 1. Sun StorEdge 5310 NAS Appliance Hardware Installation, Configuration, and User Guide • May 2005...
  • Page 75 B sides of all expansion enclosures are interconnected with Active Copper cables. Note – The A side port 2 of expansion enclosure 7 and the B side port 1 of expansion enclosure 1 remain empty. Chapter 3 Installing the Sun StorEdge 5310 Cluster...

  • Page 76: Connecting The Server Health-Monitoring And Network Cables

    LAN port 1 (Port emc1) for this health check connection FIGURE 3-20 Optical Gigabit card Port emf4 Port emf3 Heartbeat Port emc1 Port emc2 Connecting to an Optical Gigabit Network FIGURE 3-20 Sun StorEdge 5310 NAS Appliance Hardware Installation, Configuration, and User Guide • May 2005...

  • Page 77: Connecting To Copper Fast Ethernet Or Gigabit Ethernet Networks

    To connect the Sun StorEdge 5310 Cluster to a Gigabit network: Connect an RJ-45 unshielded twisted-pair cable to a 1000BASE-T connection on your LAN and to the NIC Port emc2 on the rear of each of the Sun StorEdge 5310 Cluster servers.

  • Page 78: Powering On The Sun Storedge 5310 Cluster, Controller Enclosure, And Expansion Enclosures

    Caution – When you power off the controller enclosures and expansion enclosures, wait five seconds before you power them back on. If you power the units off and on too quickly, unexpected results may occur. Sun StorEdge 5310 NAS Appliance Hardware Installation, Configuration, and User Guide • May 2005...

  • Page 79: Powering On The Expansion Enclosures

    Powering on the Controller Enclosures Caution – The expansion enclosures must be powered up first, before the controller enclosures and Sun StorEdge 5310 Cluster. If these instructions are not followed, the system could start slowly. To turn on each controller enclosure:...

  • Page 80: Powering On The Sun Storedge 5310 Cluster

    StorEdge 5310 Cluster. If these instructions are not followed, the system could start slowly. Note – You will power up and configure one server at a time. Sun StorEdge 5310 NAS Appliance Hardware Installation, Configuration, and User Guide • May 2005...

  • Page 81: Figure 3-23 Connecting The Sun Storedge 5310 Cluster Ac Power Cables

    Sun StorEdge 5310 Cluster by using the following procedure: 1. Verify that the power buttons are in the Off position. 2. Connect one end of an AC power cable to the Sun StorEdge 5310 Cluster (see FIGURE 3-23 3. Repeat for the second, third, and fourth cables.

  • Page 82: Setting Up And Configuring The System

    If your network supports DHCP, an IP address will automatically be assigned to your LAN ports. 1. If DHCP is not available, assign a static IP address using the server H1’s LCD module: Sun StorEdge 5310 NAS Appliance Hardware Installation, Configuration, and User Guide • May 2005...

  • Page 83: Configuring The System

    Follow the instructions below to use the Web Admin application to configure the system: 1. From a client on the same network, open a Java platform-enabled web browser with Java Plug-In and enter the IP address for server H1. Chapter 3 Installing the Sun StorEdge 5310 Cluster...
  • Page 84 13. On the Set Gateway Address screen, enter the gateway address and click Next to continue. 14. For all the other wizard configuration steps, please refer to the Sun StorEdge 5310 NAS Appliance Software Installation, Configuration, and User Guide for more information.

  • Page 85: Assigning Lun Ownership

    1. Launch a new browser window and enter server H1's IP address. 2. At the Web Admin login screen click Apply. A password is not required. (The password can be set later. Refer to the Sun StorEdge 5310 NAS Appliance Software Installation, Configuration, and User Guide.) 3.

  • Page 86: Assigning Lun Paths

    Refer to the Sun StorEdge 5310 NAS Appliance Software Installation, Configuration, and User Guide for additional information about LUNs and other detailed software setup and use. Sun StorEdge 5310 NAS Appliance Hardware Installation, Configuration, and User Guide • May 2005...

  • Page 87: Using The Sun Storedge 5310 Nas Appliance

    Note – The general Sun StorEdge 5310 NAS Appliance features described in this chapter also apply to the Sun StorEdge 5310 Cluster. For a specific description of Sun StorEdge 5310 Cluster technology, refer to "Sun StorEdge 5310 Cluster Technology: An Introduction"...

  • Page 88: Figure 4-1 Sun Storedge 5310 Nas Appliance Network Interface Card Ports

    "Connecting the Server Health-Monitoring and Network Cables" on page 64 for more detail.) Built-in NIC ports Sun StorEdge 5310 NAS Appliance Network Interface Card Ports FIGURE 4-1 Sun StorEdge 5310 NAS Appliance Hardware Installation, Configuration, and User Guide • May 2005...

  • Page 89: Figure 4-2 Sun Storedge 5310 Nas Appliance Power Supply

    100 to 240 volts, 50 to 60 Hz. The power supply system in the Sun StorEdge 5310 NAS Appliance consists of two redundant hot-swappable modules in a 1 + 1 configuration. Each module is capable of maintaining a load of 500 watts.

  • Page 90: External Components

    LED indicators on the front panel, as shown in FIGURE 4-3 Power Switch and Front Panel Detail FIGURE 4-3 Sun StorEdge 5310 NAS Appliance Hardware Installation, Configuration, and User Guide • May 2005...
  • Page 91 Power Button—The momentary switch (APCI compliant) that toggles the system power on and off. Caution – Do not use the power button to shutdown the Sun StorEdge 5310 NAS Appliance. Always use the proper shutdown procedure described in “Shutting Down the Server” in the Sun StorEdge 5310 NAS Appliance Software Installation, Configuration, and User Guide.

  • Page 92: Figure 4-4 Sun Storedge 5310 Nas Appliance Back Panel With Single Hba Card

    AC power supply 1 AC power plugs Built-in (reserved) NICs Keyboard (maintenance use) (maintenance use) Sun StorEdge 5310 NAS Appliance Back Panel with Single HBA Card FIGURE 4-4 Sun StorEdge 5310 NAS Appliance Hardware Installation, Configuration, and User Guide • May 2005...
  • Page 93 Note – The back panel of the Sun StorEdge 5310 NAS Appliance that attaches to two controller enclosures has two dual-port HBA cards. Enclosure Cover Caution – Only a qualified service technician should remove the enclosure cover to access any of the components inside the unit. Always properly replace the cover prior to powering on the system.

  • Page 94: Controller Enclosure And Expansion Enclosure Components

    VGA Port Do not use the VGA ports on the front and rear panels of the Sun StorEdge 5310 NAS Appliance. These connectors are reserved for Sun Microsystems Technical Support staff and used to diagnose the file server. For normal operation, use either the Web Administrator GUI or Telnet (see the Sun StorEdge 5310 NAS Appliance Software Installation, Configuration, and User Guide).

  • Page 95: Drive Shuttles

    Drive Shuttles Caution – Only Fibre Channel or SATA drives supplied by Sun Microsystems work with the Sun StorEdge 5310 NAS Appliance system. For the most current support information, please contact your Sun sales representative. Controller Enclosures Sun StorEdge 5300 RAID EU controller enclosures can be used with fibre channel expansion enclosures (EU Fs) or with SATA expansion enclosures (EU Ss).

  • Page 96: Figure 4-6 Fibre Channel Drive Shuttle

    Caution – Do not update system software or RAID firmware when the RAID subsystem is in critical state or is creating new or rebuilding an existing RAID set. Fibre Channel Drive Shuttle FIGURE 4-6 Sun StorEdge 5310 NAS Appliance Hardware Installation, Configuration, and User Guide • May 2005...

  • Page 97: Power Supplies

    The controller enclosure and expansion enclosures use the same power supply modules. Power supply module Controller enclosure Power supply module Power supply module Expansion enclosure Power supply module Power supply module Power Supply Modules FIGURE 4-7 Chapter 4 Using the Sun StorEdge 5310 NAS Appliance...
  • Page 98 Sun StorEdge 5310 NAS Appliance Hardware Installation, Configuration, and User Guide • May 2005...

  • Page 99: Specifications

    A P P E N D I X Specifications This appendix contains information about the environmental and physical characteristics as well as the power requirements of the Sun StorEdge 5310 NAS Appliance and the Sun StorEdge 5300 RAID EU controller enclosure and EU expansion enclosure.
  • Page 100 · 20% to 80%, non-condensing Non-operating · 10% to 90%, non-condensing • RAID EU & EU Operating · 20% to 80%, non-condensing Non-operating · 8% to 80%, non-condensing Sun StorEdge 5310 NAS Appliance Hardware Installation, Configuration, and User Guide • May 2005...

  • Page 101: Glossary

    A software program that enables a computer to communicate with a peripheral device. Examples include a SCSI driver, a CD–ROM driver and printer drivers. A reference to the Sun StorEdge 5310 Cluster system which consists of a pair of Dual-head...
  • Page 102 Does not usually perform network directory services or function as an application server; instead, augments storage capacities. Quick and easy to set up, NAS appliances also typically provide cross-platform file sharing. Sun StorEdge 5310 NAS Appliance Hardware Installation, Configuration, and User Guide • May 2005...
  • Page 103 SCSI IDs range from 0 to 15, and each SCSI device must be given a unique and unused SCSI ID. Single-head A reference to the Sun StorEdge 5310 NAS Appliance which consists of a single server or “head.” Server Message Block. A Microsoft-compatible network protocol for exchanging files.
  • Page 104 Sun StorEdge 5310 NAS Appliance Hardware Installation, Configuration, and User Guide • May 2005...

  • Page 105: Index

    Index conventions 5 Active/Active cluster definition 89 array definition 89 Documentation set 4 drive shuttle 83 back panel components 80 electrical grounding 14, 46 expansion enclosure definition 90 cabling drive shuttle 83 summary 32, 66 external components 78 card network interface 76 clients 3 cluster definition 89...
  • Page 106 85 power switches 79 protocols 2 VGA port 82 requirements grounding 14, 46 security 2 shuttle drive 83 status indicators, LED 79 status LED indicator 79 Sun StorEdge 5310 NAS Appliance Hardware Installation, Configuration, and User Guide • May 2005...

Table of Contents