Table of Contents
Advertisement
6. Simultaneously unlock both slide rail release buttons (
server completely into the rack.
FIGURE 2-27
The server should stop after approximately 15 inches (40 cm) of travel.
7. Verify that the cables and the CMA retracted without binding.
8. Adjust the cable hangers and CMA as required.
Connecting the Power Cables
1. Verify that both power switches are off for each controller enclosure and
expansion enclosure in the cabinet.
2. Connect each power supply in each unit to a separate power source in the cabinet.
48
Sun StorageTek 5320 NAS Appliance and Gateway System Getting Started Guide • May 2006
Slide Rail Release Button
), and push the
FIGURE 2-27
Advertisement
Table of Contents
