b. Sun StorageTek 5320 NAS Appliance server H2 (software serial number ending
"-H2") below server H1.
Attaching the CAM100 3RU Rails to a
Cabinet
The CAM100 3RU rails must be used to install the enclosures.
Note – For NAS head installation, refer to the Sun LX50/SunFire V60x/SunFire
V65x rail-mounting kit instructions.
Use the following procedure to attach the rails to a Sun Rack 900 or Sun Rack 1000
cabinet. Because this rail kit can be adapted for several cabinets, closely follow the
procedures; they may require actions that you have not previously taken.
Note – In this section, you will loosely hang the rails from screws you attach to the
side walls before connecting the rails to the front and back.
Chapter 2 Installing Servers and Back-End Storage
21