Components At The Back Of The Array - Sun Microsystems StorEdge D2 Array Installation, Operation And Service Manual

1.7

Components at the Back of the Array

This section describes the components that are at the back of the Sun StorEdge D2
array as shown in
One or two ESMs (labeled ESM 0 and ESM 1)
I
If only one ESM is used, the ESM is in position 0, and a filler is inserted on the
right (in position 1).
Two power supply canisters (labeled PS 0 and PS 1)
I
Two dual fan canisters (labeled FT 0 and FT 1)
I
FT 0
FIGURE 1-4
1-10 Sun StorEdge D2 Array Installation, Operation, and Service Manual • February 2002
.
FIGURE 1-4
One or two ESMs
ESM 0
PS 0
Two power supply canisters
Two dual-fan canisters
Array Back With ESMs, Power Supplies, and Fan Canisters
ESM 1
PS 1 FT 1