To turn on the system
Connect the power cable to the mainframe.
1
Turn on the instrument power switch.
2
When you turn on the instrument power switch, the instrument performs powerup tests that
check mainframe circuitry. After the powerup tests are complete, the screen will look similar
to the sample screen below.
The screen above is from an HP 16555A Logic Analyzer. The HP 16555D will appear as
"2.0M SAMPLE 110/500MHz LA."
To test the module
The logic analyzer module does not require an operational accuracy calibration or adjustment.
After installing the module, you can test and use the module.
•
If you require a test to verify the specifications, start at the beginning of chapter 3,
"Testing Performance."
•
If you require a test to initially accept the operation, perform the self-tests in
chapter 3.
•
If the module does not operate correctly, go to the beginning of chapter 5,
"Troubleshooting."
Preparing for Use
To turn on the system
2–11