Table of Contents
Advertisement
Special Handling and Unpacking Instruction
ESD Sensitive Device!
Electronic boards and their components are sensitive to static
electricity. Therefore, care must be taken during all handling
operations and inspections of this product, in order to ensure product
integrity at all times.
Do not handle this product out of its protective enclosure while it is not used for operational purposes unless it is
otherwise protected.
Whenever possible, unpack or pack this product only at EOS/ESD safe work stations. Where a safe work station is not
guaranteed, it is important for the user to be electrically discharged before touching the product with his/her hands or
tools. This is most easily done by touching a metal part of your system housing.
It is particularly important to observe standard anti-static precautions when changing piggybacks, ROM devices, jumper
settings etc. If the product contains batteries for RTC or memory backup, ensure that the product is not placed on
conductive surfaces, including anti-static plastics or sponges. They can cause short circuits and damage the batteries
or conductive circuits on the product.
Quality and Environmental Management
Kontron aims to deliver reliable high-end products designed and built for quality, and aims to complying with
environmental laws, regulations, and other environmentally oriented requirements.
For more information regarding Kontron's quality and environmental responsibilities, visit https://www.kontron-
electronics.de/unternehmen/qualitaet/.
www.kontron-electronics.de
SL iMX6UL/ULL – Rev. 0.4
Advertisement
Table of Contents
