Table of Contents
Advertisement
4. Board Test System
683024 | 2022.09.30
•
Board Name: Indicates the official name of the board given by the BTS.
•
Board Revision: Indicates the revision of the board.
•
MAX version: Indicates the version of the System Max
•
Power MFR: Indicates the FPGA Power manufacture.
JTAG Chain
The JTAG chain control shows all the devices currently in the JTAG chain.
Note:
System Intel MAX 10 (VTAP) is always on the JTAG chain, but change the settings of
SW4 to low or high to bypass or enable power Intel MAX 10, HPS and Intel Agilex
FPGA. System Intel MAX 10 and FPGA should all be in the JTAG chain when configured
and running the BTS GUI.
Qsys Memory Map
The Qsys memory map control shows the memory map of bts_config.sof design
running on your board. This can be visible when bts_config.sof design is running on
board.
4.1.3. The GPIO Tab
The GPIO Tab allows you to interact with all the general purpose user I/O components
on your board. You can turn LEDs on or off and detect I2C target devices connection
status.
Figure 6.
The GPIO Tab
Send Feedback
®
™
Intel
Agilex
F-Series FPGA Development Kit User Guide
15
Advertisement
Table of Contents
