Appendix B: Schematics; Schematic Statement - Respironics BiPAP Vision Service Manual

B-2

Appendix B: Schematics

B.1 Schematic Statement
B.1 Schematic Statement
Schematics are supplied with this manual in direct support of the sale and purchase of this product.
The schematics are proprietary and confidential. Do not copy the schematics or disclose them to third parties
beyond the purpose for which they are intended. Patents are pending.
The schematics are intended to satisfy administrative requirements only. They are not intended to be used for
component level testing and repair. Repairs and testing are supported only at the complete board level.
Respironics does not recommend component repair of the BiPAP Vision. The circuit boards in the BiPAP Vision
are multilayer boards. Due to the very small trace size, extreme care must be used when replacing components to
prevent permanent nonrepairable damage to the circuit board. Components are surface mounted and require
special hot air jet soldering and desoldering equipment. Most of the work should be done under a microscope set
at 25 times magnification. Use of regular soldering equipment will damage the board and void any applicable
warranty.
The schematics are of the revision level in effect at the time that this manual was last revised. Prior revisions may
be obtained upon request.
BiPAP Vision Service Manual
1015010