5-2
Chapter 5: Routine Maintenance
5.1 Cleaning the BiPAP Vision
CAUTION:
NOTE:
5.1.1 Cleaning the Front Panel
Clean the front panel as needed by wiping with water or 70% isopropyl alcohol only.
5.1.2 Cleaning the Enclosure
Clean the exterior of the enclosure as needed by wiping with any anti-bacterial agent.
CAUTION:
NOTE:
1015010
Do not immerse the BiPAP Vision in water or allow any liquid to enter the cabinet or
the inlet filter.
The following guidelines for cleaning refer to the BiPAP Vision only. Refer to the
individual instructions for cleaning accessories.
Do not allow any liquid to enter the cabinet or the inlet filter.
Do not clean the Auto-Trak sticker with anything except mild soap and water.
BiPAP Vision Service Manual