Table of Contents
Advertisement
9-5
Chapter 9: Option Installation Instructions
EPROM Upgrade or PAV / T Installation (Continued)
MCS EPROM
(S/N <106K, not upgraded)
NOTE:
If necessary, Store the removed EPROM in an approved antistatic bag or box.
k.
Carefully insert the new MC EPROM.
l.
If necessary, remove the Alarm PAL (PAV/T mode installation only).
m. Carefully insert the new Alarm B PAL (PAV/T mode installation only).
NOTE:
Ensure proper orientation before insertion. Flat edge of EPROM to the flat edge of the socket.
Step 2
Testing
To ensure the integrity of the unit, the Run-In Cycle and the System Final Test found in Chapter 8
must be performed.
1015010
Alarm PAL
Figure 9-3
Location of the MC EPROM
BiPAP Vision Service Manual
Alarm PAL
MCS EPROM
(S/N >106K, or upgraded)
Advertisement
Table of Contents
Troubleshooting
