Nortel DMS 100 Series Maintenance Manual page 110

Table 4-4 DC5A and DC5ADD outgoing signals (Sheet 2 of 2)
Status
delay dial
proceed to send
call established
clear back
re-answer
call re-established
clear forward
blocking
Note: The DMS switch requires no signal before the switch can send digits if
configured as DC5A. DC5ADD requires delay dial and proceeds to send signals
sent by the AMC node before the DMS switch sends digits. The system must send
Delay dial for a minimum period of 30 ms and within 2.5 s. Proceed to send signal
must be sent within 2.5 s of delay dial. The call established signal is not sent within
300 ms of the seize signal.
Received by DMS from
AMC
0101
1101
0101
1101
0101
0101
NA
1111
Transmitted by DMS to
AMC
0101. Refer to note.
1101. Refer to note.
0101
0101
0101
0101
1101
1101