Ntmx73 In An Rsc-M - Nortel DMS 100 Series Maintenance Manual

6-34 RSC-M card replacement procedures
NTMX73
in an RSC-M
Application
Use this procedure to replace an NTMX73 circuit card in a Remote Switching
Center Multi-access (RSC-M) main shelf.
Note: In this section, RSC-M is referred to as RCO2 in the examples.
When software outputs messages to the MAP terminal, the software does
not differentiate between the two types of RCO2.
PEC
NTMX73
Common procedures
Two common procedures are referenced in this section:
•
•
Action
This procedure contains a summary flowchart and a list of steps. Use the
flowchart to review the procedure. Follow the steps to perform the procedure.
297-8223-550 Standard 04.02 November 2000
Suffixes
AB
replacing a card
returning a card
Name
pulse code modulation (PCM) signaling card