Juniper PTX5000 Hardware Manual page 12

Copying the Junos OS to the CompactFlash Card in a PTX5000 Routing Engine | 471
Replacing an SSD Drive on a RE-DUO-C2600-16G | 472
Removing an SSD Drive From a RE-DUO-C2600-16G | 472
Installing an SSD Drive in a RE-DUO-C2600-16G | 473
Copying the Junos OS to the Solid-State Disk in a PTX5000 Routing Engine | 474
Replacing a PTX5000 RE-PTX-X8-64G Routing Engine | 475
Taking the Host Subsystem Offline | 475
Removing the Routing Engine | 477
Installing the Routing Engine RE-PTX-X8-64G | 478
Replacing an SSD Drive on a RE-PTX-X8-64G | 479
Maintaining the PTX5000 Control Boards | 481
Replacing a PTX5000 Control Board | 482
Taking the PTX5000 Host Subsystem Offline | 482
Removing a PTX5000 Control Board | 484
Installing a PTX5000 Control Board | 486
Replacing a PTX5000 Management Console or Auxiliary Port Cable | 489
Removing a Management Console or Auxiliary Port Cable | 489
Installing a Management Console or Auxiliary Port Cable | 490
Replacing a PTX5000 Management Ethernet Cable | 490
Removing a PTX5000 Management Ethernet Cable | 491
Installing a PTX5000 Management Ethernet Cable | 491
Upgrading the PTX5000 Host Subsystem | 492
Upgrading to the RE-PTX-X8-64G Routing Engine in a Redundant Host Subsystem | 493
Taking the Host Subsystem Offline Before Upgrading the Routing Engine | 493
Removing the Backup Routing Engine During Upgrade | 495
Removing the Control Board During Upgrade | 496
Installing the CB2-PTX Control Board During Upgrade | 497
Installing the Routing Engine RE-PTX-X8-64G During Upgrade | 498
Verifying the Upgrade and Configuring the Upgraded Routing Engine | 499
Upgrading to the RE-PTX-X8-64G Routing Engine in a Nonredundant Host Subsystem | 499
Taking the Host Subsystem Offline in a Nonredundant Host Subsystem | 500
xii