Install The 530Lsk-Traditional Logs Set - Valor Portrait 530IN Installation & Owner's Manual

QUALIFIED
INSTALLER
Install the 530LSK—Traditional Logs Set
1. Place the base log on the supports in the fi rebox
and against the support at the fi rebox back.
2. Locate the rear upper log on the two ceramic pins at
the rear of the base log.
3. Place the front log behind the metal strip at the front
of the fi rebox.
4. Locate the right middle log on the pin in the right
hand side of the base log .
1
36
Installation
Back Brick
Burner
BASE
LOG
Firebox
supports
Burner
bracket
Rest the base log
behind the burner
on its bracket flange
SIDE VIEW
1a
4
5. Locate the left side log on the ceramic pin on the left
hand side of the base log. Rest the narrow nose of
this log on the projection at the front center of the
base log—ensure that the narrow nose does not
rest on the burner.
6. Locate the right side log on the pin in the front log
and rest the nose of this log on the projection on the
base log —ensure that the nose does not rest on the
burner.
2
5
3
6