Liner Panels-Traditional Logs & Coals - Valor PORTRAIT 530IN Installation Manual

Direct vent zero clearance gas fireplace

Hide thumbs Also See for PORTRAIT 530IN:

Table of Contents

Installation

Install Ceramic Liners (Logs or Coals only)

The 530LSK and CSK fuel beds include a set of

reversible liners. Check with the consumer which side

must be visible and follow the instructions below to

install the liner set.

• 530RSK Rock Set liners. For ceramic liners installation

with the 530RSK, see

Rock Set and Liners 530RSK in

Fuel Beds section in this manual.

• 530DWK Driftwood Kit liners. For ceramic liners in-

stallation with the 530DWK, see

530DWK in Fuel Beds section in this manual.

• 580RGL Reﬂ ective Glass Liner Set. To install the

580RGL, see the installation instructions provided

with the kit.

• 567FGP Top Grille. At this point, you can install the

567FGP, if used (logs, rocks or driftwood versions

only). The 567FGP Top Grille is sold separately except

when included with front trim—see front trim installa-

tion manual.

1. Locate the ceramic rear wall in the channel at back

of the ﬁ rebox and ﬂ at against the back of the ﬁ re-

box.

2. Locate the sidewalls in the channels at the sides of

the ﬁ rebox.

3. Remove two screws from under the top front of the

ﬁ rebox. Using these screws ﬁ t the port cover.

Liner Panels—Traditional Logs & Coals

Driftwood and Liners

Table of Contents

Portrait 530ip