Defining The Key Type - Nortel IP Phone 2001 User Manual

Defining the Key type

Follow this procedure to define the key type.
On the Features menu, if you select a feature assigned to a soft key, you can
change the key type to from Central to Local. Changing the key type to Local
causes a change in the Options menu. When a key is defined as Central you
get this menu: 1. Key Type, 2. AutoScroll. When you select Local, the second
menu item changes to 2. Feature.
Selecting Feature and pressing Ok opens a list the Directory contacts list. By
default, the first item in the list has a check mark beside it, and is empty. You
can scroll through the list using the navigation keys to select an entry and then
press OK to have that contact appear against the selected soft key. For
example, selecting the first entry and pressing Ok causes that entry to appear
as a label above soft key 2. The label follows the format defined for this entry.
After the key is configured, you can dial the person by pressing the soft key.
Prerequisites
You must be logged on.
Procedure steps
Step
1
2
3
4
5
6
7
Copyright © 2006, Nortel Networks
- 72 -
Using the Feature menu
Action
From the main menu, open the Settings menu.
From the Settings menu, open the Call menu.
From the Call menu, open the Feature menu.
From the Feature menu, select Assign.
Press Ok.
The Assign menu opens.
From the Assign menu, select Key Type.
Perform one of these steps.
• To assign a feature from the core, select Central.
• To assign a feature locally, select Local.
Carrier VoIP
Nortel IP Phone 2001 User Guide
NN10300-005 06.04 Standard
(I)SN09U October 2006
Nortel Networks Confidential