Enabling Or Disabling Autoscroll - Nortel IP Phone 2001 User Manual

Enabling or disabling AutoScroll

If the AutoScroll feature is enabled, the IP Phone automatically directs you to
the screen for the active feature. For example, if your second soft key is
configured on screen two, and you get a call to that number, the feature
screens scroll to page two. You can answer the call immediately without
searching for the screen.
Prerequisites
You must be logged on.
Procedure steps
Step
1
2
3
4
5
6
7
8
Copyright © 2006, Nortel Networks
- 74 -
Using the Feature menu
Action
From the main menu, open the Settings menu.
From the Settings menu, open the Call menu.
From the Call menu, open the Feature menu.
From the Feature menu, select Assign.
From the Assign menu, select AutoScroll.
Press Ok.
The AutoScroll screen appears.
Perform one of these steps.
• To enable AutoScroll, select Enable.
• To disable AutoScroll, select Disable.
Press Ok.
A check mark appears beside the item to indicate your choice. You
return to the Assign menu.
Carrier VoIP
Nortel IP Phone 2001 User Guide
NN10300-005 06.04 Standard
(I)SN09U October 2006
--End--
Nortel Networks Confidential