Defining The Key Type; Nn10300-005 09.01 Standard 4 July; Carrier Voip; Nortel Ip Phone 2001 User Guide (Cicm - Nortel IP Phone 2001 User Manual

62 Using the Feature menu
Defining the Key type
Follow this procedure to define the key type.
On the Features menu, if you select a feature assigned to a soft key, you
can change the key type to from Central to Local. Changing the key type
to Local causes a change in the Options menu. When a key is defined as
Central you get this menu: 1. Key Type, 2. AutoScroll. When you select
Local, the second menu item changes to 2. Feature.
Selecting Feature and pressing Ok opens a list the Directory contacts
list. By default, the first item in the list has a check mark beside it, and is
empty. You can scroll through the list using the navigation keys to select
an entry and then press OK to have that contact appear against the
selected soft key. For example, selecting the first entry and pressing Ok
causes that entry to appear as a label above soft key 2. The label follows
the format defined for this entry. After the key is configured, you can dial
the person by pressing the soft key.
Prerequisites
You must be logged on.
Procedure Steps
Step
1
2
3
4
5
6
7
8
Copyright © 2008 Nortel Networks
.
The Assign menu opens.
Action
From the main menu, open the Settings menu.
From the Settings menu, open the Call menu.
From the Call menu, open the Feature menu.
From the Feature menu, select Assign.
Press Ok.
The Assign menu opens.
From the Assign menu, select Key Type.
Perform one of these steps.
•
To assign a feature from the core, select Central.
•
To assign a feature locally, select Local.
Press Ok.

Carrier VoIP

Nortel IP Phone 2001 User Guide (CICM)

NN10300-005 09.01 Standard
4 July 2008
--End--