Viewing, Disabling, Or Enabling Auto Login - Nortel IP Phone 2001 User Manual

Viewing, disabling, or enabling Auto Login

Follow this procedure to view, enable, or disable the Auto Login feature.
Any maintenance activity, for example a firmware upgrade, results in a forced
log off for logged on users. If you enable Auto Login, if you experience a forced
log off, you are automatically logged on to the Centrex IP Client Manager
when the service is available again.
Prerequisites
• You must be logged on.
• You must have permission to edit this feature. If you have permission, a
check mark appears beside Enabled when the screen appears.
Procedure steps
Step
1
2
3
4
5
6
7
Copyright © 2006, Nortel Networks
- 59 -
Using the User menu
Action
From the main menu, open the Settings menu.
From the Settings menu, open the User menu.
From the User menu, select Auto Login.
Press Ok.
The Auto Login screen appears, displaying your Auto Login profile.
If you do not have permission to edit this feature, the procedure is
finished.
If you have permission to edit this feature, click Ok.
The Enabled screen appears. A check mark appears if the feature is
enabled.
Perform one of these steps.
• To enable Auto Login, select Enable.
• To disable Auto Login, select Disable.
Press Ok.
A check mark appears beside the item you selected. You return to the
Auto Login screen.
Carrier VoIP
Nortel IP Phone 2001 User Guide
NN10300-005 06.04 Standard
(I)SN09U October 2006
--End--
Nortel Networks Confidential