Defining The Key Type - Nortel 1120E User Manual

48 Using the Feature menu
3
4
Defining the key type
Follow this procedure to define the key type.
Each feature key can be defined in one of two ways: Central or Local. A
feature key defined as Central can have a Centrex feature, such as Call
Forward, assigned to it. A feature key defined as Local can have a directory
entry assigned to it. By default, all feature keys are defined as Central.
For further information about Centrex features, see CICM Basics,
NN10044-111.
Step
1
2
3
4
5
6
Copyright © 2006, Nortel Networks
.
From the Feature menu, select and open Assign.
Press Ok, or press the send key.
The Assign menu opens.
Action
From the main menu, open the Feature menu.
A list of the feature keys and their current assignments appears.
Select a key to change.
The Feature submenu appears.
Select and open Assign.
If the key you selected in step 2 is assigned to a Centrex feature,
these soft key labels appear: Key Type and Autoscroll.
If the selected key is assigned to a local feature, these soft key labels
appear: Key Type and Feature.
Press Key Type.
The Key Type screen appears. A check mark appears beside the
type currently assigned to the key.
Perform one of these actions:
• To change Central to Local, select Local.
• To change Local to Central, select Central.
Press Ok, or press the send key.
The key type is changed and a check mark appears beside the
selection.
Carrier VoIP
Nortel IP Phone 1120E User Guide
NN10300-022 01.02 Standard
(I)SN09U 20 October 2006
—End—
Nortel Networks Confidential