Assigning A Feature To A Soft Key - Nortel IP Phone 2001 User Manual

Assigning a feature to a soft key

An assigned feature appears in the display except when the terminal is in the
state specified by the profile: Hide when idle or Hide when active.
If a feature is already assigned to the selected soft key, a message prompt
appears to ask if you want to replace the current assignment.
Prerequisites
You must be logged on.
Procedure steps
Step
1
2
3
4
5
6
Copyright © 2006, Nortel Networks
- 39 -
Using the Call Services menu
Action
From the main menu, open the Call Services menu.
From the Call Services menu, select the feature you want to assign
to a soft key.
From the Call Services menu, select Change Softkey.
Press Ok.
The Select Key screen appears.
Press the soft key below the number of the key to which you want to
assign the feature.
The confirmation screen appears.
Confirm the action
The feature is assigned to the selected soft key.
Carrier VoIP
Nortel IP Phone 2001 User Guide
NN10300-005 06.04 Standard
(I)SN09U October 2006
--End--
Nortel Networks Confidential