Viewing, Disabling, Or Enabling Auto Login; Carrier Voip; Nortel Ip Phone 1110 User Guide (Cicm - Nortel 1110 User Manual

56 Using the User menu
Step
1
2
3
4

Viewing, disabling, or enabling Auto Login

Follow this procedure to view, disable, or enable auto login.
Any maintenance activity, for example a firmware upgrade, results in a
forced log off. If you enable Auto Login, you are automatically logged on to
the IP Client Manager when the terminal is available again.
Prerequisites
You must have permission to edit the Auto Login setting. If you have
permission, a check mark appears beside Enabled when the screen
appears.
Step
1
2
3
4
5
Copyright © 2007, 2008 Nortel Networks
.
Action
From the main menu, open the Settings menu.
From the Settings menu, open the User menu.
From the User menu, select and open Login Type.
If the current login type is unique, Unique is displayed. If the
current login type is joint, Joint is displayed.
Press Ok, or press the send key.
You return to the User menu.
Action
From the main menu, open the Settings menu.
From the Settings menu, open the User menu.
From the User menu, select and open Auto Login.
The Auto Login screen appears displaying your Auto Login
profile.
If you do not have permission to edit this feature, the procedure
is finished
If you have permission to edit this feature, click Ok, or press the
send key.
The Enabled screen appears. A check mark appears if the
feature is enabled.
Perform one of these actions:
•
To enable Auto Login, select Enabled.
•
To disable Auto Login, select Disabled.

Carrier VoIP

Nortel IP Phone 1110 User Guide (CICM)

NN10300-021 02.03 Standard
7 March 2008
--End--