Eng] 6.3. [Dksf 48.5 Iu] Initial Configuration Of Smoke Sensors - NetPing 8/PWR-220 v4/SMS User Manual

Hide thumbs Also See for 8/PWR-220 v4/SMS:
Table of Contents

Advertisement

NetPing server room environmental monitoring solutions and IP power distribution units.

[ENG] 6.3. [DKSF 48.5 IU] Initial Configuration of Smoke Sensors

The "
SMOKE
" page of the device's web interface displays the status of smoke detectors connected to the device. Four smoke detectors of the
1-Wire model range can be connected to the device.
To connect a sensor, specify its unique number in the entry field  «
Unique Id of 1W Sensor — a unique 1-Wire smoke sensor number connected to the 1W connector. The address consists of 4 four-digit numbers
in hexadecimal notation.
In Default:
A Unique Id of 1W Sensor you can find out via 2 ways: You can find out a unique Id of 1W Sensor number by means of two ways:
1.
A Unique Id of 1W Sensor number is printed on the sticker on the sensor.
2.
A Unique Id of 1W Sensor number can be found out in the
1W Smoke Sensor?
Copyright © NetPing east Co., Ltd / E-mail:
Unique Id of 1W Sensor»
empty line.
section: [ENG] 6.2. [DKSF 48.5 IU] How to Determine the Unique Number of a
support@netpingdevice.com www.netpingdevice.com
.
/
/ Phone: +886-2-23121582

Advertisement

Table of Contents
loading

Table of Contents