[ENG] 6.3. [DKSF 48.4 IU] Initial Configuring of Smoke Sensors
At the page «
SMOKE
» of a device web interface, a status of smoke sensors, connected to a device is displayed. It is possible to plug up to four smoke
sensors of a 1-Wire model line to a device.
To plug a sensor, indicate its Id in the field «
Unique Id of 1W Sensor – is unique Id of a 1-Wire smoke sensor, which is connected to the 1W socket. The address consists of 4 four-digit hexadecimal
numbers.
On default empty line
:
You can know a unique Id of a 1-Wire sensor in two ways:
1.
A unique Id of a 1-Wire smoke sensor is indicated on the sticker at the sensor.
2.
You can know a unique Id of a 1-Wire smoke sensor from reading the section
1-Wire Smoke Sensor?
Copyright © NetPing east Co., Ltd E-mail:
Unique Id of 1W Sensor»
»
support@netpingdevice.com
.
«6.2. [DKSF 48.4 IU] How to Determine a Unique Number of a
Phone:+886-2-23121582