Eng] 3.11. [Dksf 48.5 Iu] How To Update The Firmware Of The Device - NetPing 8/PWR-220 v4/SMS User Manual

Hide thumbs Also See for 8/PWR-220 v4/SMS:
Table of Contents

Advertisement

NetPing server room environmental monitoring solutions and IP power distribution units.

[ENG] 3.11. [DKSF 48.5 IU] How to Update the Firmware of the Device?

There is a need to do the following to update an embedded firmware version:
1.
Download an up-to-date firmware from the official website of the company (section «
2.
Go to the page «
Firmware
specific software. To do that, you will need a browser supporting HTML 5 API. Google Chrome or Internet Explorer of the 9th version and
higher are recommended;
3.
Drag a firmware file to the indicated page area;
4.
Wait until a firmware file is copied to a device
5.
Click the button «Update Firmware»
Wait for the message on a successful operation completion:
Retry if an updating process was interrupted. A web interface (pages «
not successfully updated.
Certain system settings may be changed after updating. Do not forget to check the most important operation parameters.
Copyright © NetPing east Co., Ltd / E-mail:
» of a device web interface. You can easily update the firmware of a device from this page without using any
support@netpingdevice.com www.netpingdevice.com
Downloads
Home
», «
Setup
», «
Firmware
») will be available even if the firmware was
/
/ Phone: +886-2-23121582
»): 
http://www.netpingdevice.com
.

Advertisement

Table of Contents
loading

Table of Contents