Table of Contents
Advertisement
NetPing server room environmental monitoring solutions and IP power distribution units.
[ENG] 6.7. [DKSF 48.5 IU] I Want To Configure Sending the Notifications When a Status of a Smoke Sensor is changed. How To Do This?
Sending notifications when a status of a smoke sensor is changed is configured at the page «
When clicking the button «
Configure
with an embedded GSM modem) and SNMP Trap:
where:
Alert – is a checkbox, when checked a device will send notifications if a smoke sensor has been switched
checkbox is not checked
Normal State – is a checkbox, when checked a device will send notifications if a smoke sensor has been switched into a
default
: checkbox is not checked
Powered Off or Failed – is a checkbox, if checked a device will send notifications if a connection is lost or when a smoke sensor is de-energized .
On default
: checkbox is not checked
After setting all necessary parameters, click the button
Copyright © NetPing east Co., Ltd / E-mail:
» a menu of settings appears for sending notifications of the next types: Log, Syslog, e-mail, SMS (in a device
«Apply changes»
support@netpingdevice.com www.netpingdevice.com
SMOKE
.
/
/ Phone: +886-2-23121582
» of a device web interface:
into a status «Alert».
On default
«normal state». On
:
Advertisement
Table of Contents
