Eng] 6.6. [Dksf 48.5 Iu] How To Turn On The Power And Reset The Smoke Sensor - NetPing 8/PWR-220 v4/SMS User Manual

NetPing server room environmental monitoring solutions and IP power distribution units.

[ENG] 6.6. [DKSF 48.5 IU] How to Turn On the Power and Reset the Smoke Sensor?

Power supply or reset of smoke sensors is managed at the page «
A checkbox « Power » allows to supply voltage to smoke sensors.
A status « Alarm » of smoke sensors is reset by clicking the button «
seconds.
Copyright © NetPing east Co., Ltd / E-mail:
SMOKE
On default
Reset
support@netpingdevice.com www.netpingdevice.com /
» of a device web interface:
: checkbox is not checked
». In this case, there will be no power supply at smoke sensors during 10
/ Phone: +886-2-23121582