Eng] 3.10. [Dksf 48.5 Iu] How To Receive Notifications And Reports Via Email - NetPing 8/PWR-220 v4/SMS User Manual

Hide thumbs Also See for 8/PWR-220 v4/SMS:
Table of Contents

Advertisement

NetPing server room environmental monitoring solutions and IP power distribution units.

[ENG] 3.10. [DKSF 48.5 IU] How to Receive Notifications and Reports via Email?

To configure the module for sending e-mail notifications and reports about a status, there is a need to go to the page «
interface. The equipment sends notifications using an SMTP protocol. 
Events, on which e-mail notifications will be sent, are set at other pages of a device web interface.
where:
Enable Sending of E-mail – 
when unchecking the checkbox a device will not send e-mail notifications. This was designed, first of all, to handle
maintenance in a server room, as well as the one of the equipment. On default: checkbox is not checked
SMTP Server Address –
 is an email address for an incoming mail. 
SMTP Server TCP Port –
 is an email server port, which works via an SMTP protocol. 
Username –
   is a username of an SMTP server. 
Password –
   is a password of an SMTP server user. 
From –
 a sender's address. 
On default: empty line
To –
   a destination address for e-mail notifications. 
Copy To (сс:) – 
  addresses of secondary recipients for e-mail notifications, to whom a copy is sent. 
Time for Summary Reports (HH:MM 24h format, up to 12 time points, divided by space) – 
sent
via e-mail. 
On default: empty line
After setting the parameters, click the button «Apply changes».
  You can add a display of the device name in the email notification. You can find wow to do it  on the page  «
Configure a Hostname, a Location and Contact?
The device works only with the email servers that support an SMTP-protocol and authentication methods AUTH PLAIN and AUTH
LOGIN, as well as a no-authentication method! At the same time, the device does not support SSL, TLS or any other encoding!
Copyright © NetPing east Co., Ltd / E-mail:
On default: empty line
On default: empty line
On default: empty line
On default: empty line
support@netpingdevice.com www.netpingdevice.com
/
On default: 25
On default: empty line
  is a time when reports on a status of sensors
[ENG] 3.1. [DKSF 48.5 IU] How to
/ Phone: +886-2-23121582
E-MAIL
» of a web
will be

Advertisement

Table of Contents
loading

Table of Contents