Pa-5400 Series Front And Back Panel Descriptions; Pa-5400 Series Front Panel - PaloAlto Networks PA-5400 Series Hardware Reference Manual

PA-5400 Series Firewall Overview

PA-5400 Series Front and Back Panel Descriptions

•

PA-5400 Series Front Panel

• PA-5400 Series Back Panel
PA-5400 Series Front Panel
The following image shows the front panel of the PA-5410, PA-5420, PA-5430, and PA-5440
firewalls. The table describes each front panel component.
Item Component
1 Ethernet ports 1 through 8
2 SFP+ ports 9 through 20
3 SFP28 ports 21 through
24
PA-5400 Series Next-Gen Firewall Hardware Reference
Description
Eight RJ-45
10Mbps/100Mbps/1Gbps/2.5Gbps/5Gbps/10Gbps ports
for network traffic.
Ports 9 through 20 are SFP (1Gbps) or SFP+ (10Gbps)
based on the installed transceiver.
The SFP ports can be remapped as HA-1 ports
via PAN-OS or Panorama. These remapped
HA-1 ports offer high availability connectivity
over a longer distance than what is permitted
by the HA1-A and HA1-B ports listed below.
Four SFP28 (25Gbps) ports that also support 10GE/SFP+
modules.
The FEC setting of the remote endpoint
must be set to RS-FEC to ensure that the link
remains up.
14 2022 Palo Alto Networks, Inc.
©