PaloAlto Networks PA-5400 Series Hardware Reference Manual page 99

Service the PA-5400 Series Firewall Hardware
If you install a DPC in Slot 2 of the appliance, then there is no logical pairing with Slot 4.
See the following table of possible CLI commands that are used to restart, power on, or power off
a card.
For more information on card states, see
CLI Command
request chassis admin-power-on slot
<>
request chassis admin-power-on slot
<> target ha-pair
request chassis admin-power-off slot
<> now <>
request chassis admin-power-off slot
<> target ha-pair now <>
request chassis power-on slot <>
request chassis power-on slot <> tar
get ha-pair
request chassis power-off slot <> no
w <>
request chassis power-off slot <> ta
rget ha-pair now <>
request chassis restart slot <>
request chassis restart slot <> targ
et ha-pair
PA-5400 Series Next-Gen Firewall Hardware Reference
PA-5450 Front Slot and Card
Result
Power on a card in the selected slot.
Power off a card in the selected slot.
Power on a card in the selected slot.
Power off a card in the selected slot.
Restart a card in the selected slot.
99
States.
2022 Palo Alto Networks, Inc.
©