Pa-1400 Series Front Panel - PaloAlto Networks PA-1400 Series Hardware Reference Manual

PA-1400 Series Firewall Overview

PA-1400 Series Front Panel

The following image shows the front panel of the PA-1410 and PA-1420 firewalls and the table
describes each front panel component.
Item Component
1 Ethernet ports 1 through 12
2 SFP ports 13 through 22
PA-1400 Series Next-Gen Firewall Hardware Reference
Description
Twelve RJ-45 ports for network traffic. The link
speed and link duplex are auto-negotiate only.
PA-1410
• Ports 1 through 8 — 10Mbps/100Mbps/1Gbps
• Ports 9 through 12 —
10Mbps/100Mbps/1Gbps/2.5Gbps/5Gbps
PA-1420
• Ports 1 through 4 — 10Mbps/100Mbps/1Gbps
• Ports 5 through 12 —
10Mbps/100Mbps/1Gbps/2.5Gbps/5Gbps
On both the PA-1410 and PA-1420, ports 9, 10, 11,
and 12 are Power Over Ethernet (PoE) ports. They
can be configured to transfer power to a connected
device. Refer to the PAN-OS Networking Admin
Guide for PoE configuration information.
Ten SFP (1Gbps) or SFP+ (10Gbps) ports based on
the installed transceiver.
PA-1410
• Ports 13 through 18 — 1Gbps
• Ports 19 through 22 — 10Gbps
PA-1420
• Ports 13 and 14 — 1Gbps
• Ports 15 through 22 — 10Gbps
14 2022 Palo Alto Networks, Inc.
©