PaloAlto Networks PA-5400 Series Hardware Reference Manual page 61

PA-5400 Series Firewall Installation
STEP 1 | Read Determine PA-5450 Firewall Power Configuration Requirements
understand the available power options and that you provide enough power to the firewall
based on your configuration.
STEP 2 | Read Product Safety
STEP 3 | Put the provided ESD wrist strap on your wrist ensuring that the metal contact is touching
your skin. Then attach (snap) one end of the ground cable to the wrist strap and remove
the alligator clip from the banana clip on the other end of the ESD grounding cable. Plug
the banana clip end into one of the ESD ports located on the back of the appliance before
handling ESD sensitive hardware. For details on the ESD port location, see
Panel.
STEP 4 |
For DC deployments, ensure that your DC power feed is powered off.
STEP 5 | Remove the four nuts from the ground studs located on the back of the appliance on the
upper left side.
PA-5400 Series Next-Gen Firewall Hardware Reference
Warnings.
61
to ensure that you
PA-5450 Back
2022 Palo Alto Networks, Inc.
©