PaloAlto Networks PA-5400 Series Hardware Reference Manual page 90

Service the PA-5400 Series Firewall Hardware
STEP 5 | While still gripping the fan assembly handle, gently pull the fan assembly out of its slot.
STEP 6 | Install the replacement fan by sliding it into the vacant fan slot, ensuring that the thumb tab
is on the bottom.
STEP 7 |
Verify that the new fan assembly is operational by noting the status of the fan assembly
LED and the fan LED on the MPC. The individual fan assembly LED shows green if it is
functioning as expected. Similarly, the fan LED on the MPC also shows green if all fans are
working as expected. You can also view the status of the fan trays by entering the following
command:
admin@PA-5450> show system environmentals fan-tray
To view the status of each fan on a fan tray, run the following command:
admin@PA-5450> show system environmentals fans
PA-5400 Series Next-Gen Firewall Hardware Reference
90
2022 Palo Alto Networks, Inc.
©