PaloAlto Networks PA-5400 Series Hardware Reference Manual page 36

PA-5400 Series Firewall Module and Interface Card Information
Item Component
1 LED Indicators
2 Ejector Tabs
Interpret the PA-5400 Series DPC-A LEDs
Use the following information to learn how to interpret the LED dashboard and port LEDs on the
PA-5400 Series Firewall Data Processing Card (DPC).
The following table describes the functions and states of the DPC LED dashboard.
LED
TMP
(Temperature)
ALM
(Alarm)
STS
(STATUS)
PWR
SVC
(Service)
PA-5400 Series Next-Gen Firewall Hardware Reference
State Description
Green The card temperature is normal.
Yellow The card temperature is outside the temperature tolerance.
Red The card hardware failed.
Off The card is operating normally.
Green The card is operating normally.
Yellow The card is booting up.
Green The card is powered on.
Off The card is powered off.
Allows a remote administrator to illuminate the SVC LED on a specific front-slot
card so an on-site technician can locate the card.
Enter the following command to view the status of the SVC LED on all cards
that have this LED:
admin@PA-5450> show system service-led status
Description
Five LEDs that indicate the status of various hardware
components. For details on the LEDs, see
PA-5400 Series DPC-A LEDs
Push tabs that are used to
Processor Card (DPC).
36
Interpret the
Replace a PA-5400 Series Data
2022 Palo Alto Networks, Inc.
©