PaloAlto Networks PA-5400 Series Hardware Reference Manual page 108

Service the PA-5400 Series Firewall Hardware
Disk id Sys2
(MICRON_M510DC_MT)
-----------------------------------------------------------------------------
Partition status
panlogs
Drive id Sys2
maint
Drive id Sys2
sysroot0
Drive id Sys2
sysroot1
Drive id Sys2
pancfg
Drive id Sys2
panrepo
Drive id Sys2
swap
Drive id Sys2
STEP 4 |
Disconnect power from the firewall, then remove the AC power cords.
STEP 5 | Unscrew the captive screw on the system drive cover on the front side of the firewall. See
PA-5400 Series Front Panel
PA-5400 Series Next-Gen Firewall Hardware Reference
for help locating the system drive cover.
108
Present
clean, degraded
active sync
clean, degraded
active sync
clean, degraded
active sync
clean, degraded
active sync
clean, degraded
active sync
clean, degraded
active sync
clean, degraded
active sync
2022 Palo Alto Networks, Inc.
©