PaloAlto Networks PA-5400 Series Hardware Reference Manual page 28

PA-5400 Series Firewall Module and Interface Card Information
Item Component
9 Ejector Tabs
Interpret the PA-5400 MPC-A LEDs
Use the following information to learn how to interpret the LED dashboard located on the
PA-5400 Management Processor Card (MPC-A).
The following table describes the functions and states of the MPC LED dashboard.
LED
TMP
(Temperature)
HA
(High
Availability)
STS
(STATUS)
PWR
PS (Power
Supplies)
PA-5400 Series Next-Gen Firewall Hardware Reference
State Description
Green The card temperature is normal.
Yellow The card temperature is outside the temperature tolerance.
Green The firewall is in an active HA state.
Yellow The firewall is in a passive HA state.
Off The firewall is not part of an HA configuration.
Green The card is operating normally.
Yellow The card is booting up.
Green The card is powered on.
Off The card is powered off.
Green All power supplies are operating normally.
Red A power supply has encountered a failure.
Description
first firewall in an HA pair to the HA1-A port on the
second firewall in the pair, or connect these two ports to
each other through a switch or router.
Push tabs that are used to
Management Processor Card
28
Replace a PA-5400 Series
(MPC).
2022 Palo Alto Networks, Inc.
©