PaloAlto Networks PA-5400 Series Hardware Reference Manual page 27

PA-5400 Series Firewall Module and Interface Card Information
Item Component
6 Logging Ports
7 Management Ports
8 HA1 Ports
PA-5400 Series Next-Gen Firewall Hardware Reference
Description
must ensure that both the HA2 and HA2-Backup links are
configured on dataplane interfaces. A mix of a dataplane
port and an HSCI port for either HA2 or HA2-Backup will
result in a commit failure.
Two SFP/SFP+ logging ports that offer 1/10GE
connectivity and are used as log interfaces. LOG-1 and
LOG-2 are bundled by default as a single logical interface
called bond1. Bond1 supports LACP (link aggregation
control protocol).
You must Configure Log Forwarding
the log interface to one or more log collectors. If the log
interface is not configured, the management interface is
used to forward logs instead.
LOG-1 and LOG-2 only support fiber SFP/SFP
+ transceivers. Copper SFP/SFP+ transceivers
are not supported.
Two SFP/SFP+ management ports providing 1/10GE
connectivity that are used to access the management
interface. MGT-A and MGT-B are bundled by default
as a single logical interface called bond0. The two
bonded ports provide redundancy, which enables the
management interface to remain active if one interface
goes down.
When using bond0 with a switch, the switch
should be configured with either a dynamic
LAG setting or no LAG setting. Configuring the
switch to use a static LAG setting causes the
switch to lose connectivity.
To manage the firewall, change your management
computer IP address to 192.168.1.2, connect an SFP+
cable from your computer to one of the MGT ports and
browse to https:// 192.168.1.1. The default login name is
admin and the default password is admin.
The management interface is used for
log forwarding by default if you have not
configured a log interface.
Two SFP/SFP+ ports providing 1/10GE connectivity
for high availability (HA) control and synchronization.
Connect this port directly from the HA1-A port on the
27
to forward logs from
2022 Palo Alto Networks, Inc.
©