PaloAlto Networks PA-5400 Series Hardware Reference Manual page 33

PA-5400 Series Firewall Module and Interface Card Information
LED
TMP
(Temperature)
ALM
(Alarm)
STS
(STATUS)
PWR
SVC
(Service)
SVC
(Continued)
PA-5400 Series Next-Gen Firewall Hardware Reference
State Description
Green The card temperature is normal.
Yellow The card temperature is outside the temperature tolerance.
Red The card hardware failed.
Off The card is operating normally.
Green The card is operating normally.
Yellow The card is booting up.
Green The card is powered on.
Off The card is powered off.
Allows a remote administrator to illuminate the SVC LED on a specific front-slot
card so an on-site technician can locate the card.
Enter the following command to view the status of the SVC LED on all cards
that have this LED:
admin@PA-5450> show system service-led status
Service LED
Slot Description
s1 PA-5400-NC-A On
s2 empty Off
s3 PA-5400-DPC-A On
s4 empty Off
s5 empty Off
s6 empty Off
s7 PA-5400-MPC-A On
Enter the following command to view the status for a card in a specific slot:
admin@PA-5450> show system service-led status slot s3
Enter the following command to enable all SVC LEDs:
admin@PA-5450>set system setting service-led enable yes
Enter the following command to disable the SVC LED:
admin@PA-5450> set system setting service-led enable no
Status
33
2022 Palo Alto Networks, Inc.
©