PA-5400 Series Firewall Module and Interface Card Information
LED
The following table describes functions and states of the SFP+ port LEDs.
LED
Left
Right
The following table describes functions and states of the QSFP28 port LEDs. The LEDs are tri-
color and the color indicates link and the current port speed.
Interface Speed
10Gbps
25Gbps
40Gbps
100Gbps
PA-5400 Series Next-Gen Firewall Hardware Reference
State
Description
Enter the following command to enable the SVC LED on the card in a specific
slot:
admin@PA-5450> set system setting service-led enable slo
t s3 yes
Off
LED is off.
On
LED is solid blue.
Description
The LED shows green if there is a network link.
Blinks green or stays green if there is network activity.
Green LED
On
On
Off
Off
Blue LED
Off
On
Off
On
34
Yellow LED
Off
Off
On
Off
2022 Palo Alto Networks, Inc.
©