Table of Contents
Advertisement
2-16KC
Maintenance and Service
Accessories
Glass tubes
Polycarbonate tubes
Polypropylene copolymer tubes
Teflon tubes
Aluminium rotors
Polycarbonate/Polyallomer lids for angle rotors
Polysulfone lids for angle rotors
Aluminium buckets
Polysulfone caps for buckets
Rubber adapter
Round carriers made of polypropylene
ditto, made of polyallomer and polycarbonate
Rectangular carriers made of polypropylene
ditto, made of polyallomer and polycarbonate
Fig. 8.1: Autoclaving table
8.3 Service
50
In the event of service work that requires the removal of the panels,
there is a risk of electric shock or mechanical injury. Only qualified
specialist personnel is authorised to perform this service work.
The centrifuge is subject to high mechanical stress. In order to be
able to withstand this high level of stress, high-quality components
were used during the production of the centrifuge. Nevertheless, wear
cannot be excluded and it may not be visible from the outside.
Especially the rubber parts that are – among other things – part of the
motor suspension, are subject to ageing.
This is why we recommend having the centrifuge checked by the
manufacturer during an inspection once per year in the operating
state and once every three years in the dismantled state. Rubber
parts should be replaced after three years or a maximum of 15,000
cycles.
max. temp.
min. time max. time max.
(°C)
134-138
3
115-118
30
115-121
30
134-138
3
134-138
3
115-118
30
134-138
3
134-138
3
134-138
3
115-118
30
115-118
30
115-118
30
115-118
30
115-118
30
Version 03/2010, Rev. 1.7 of 27/01/2012
Translation of the original operating manual
cycles
40
-
40
20
40
30
5
100
20
-
40
20
5
100
20
-
5
100
40
-
40
-
40
-
40
-
40
-
Advertisement
Table of Contents
