Grafical Representation Of The Rotors - Sigma 2-16KC Operating Manual

11.3 Grafical Representation of the Rotors

The graphical representation of the rotors shows the maximum and
minimum radii of the accessories used. If necessary, the values must
be manually calculated (see 11.4.1 "RCF", page 62).
Fig 11.1:
Minimum and maximum radius of
a swing-out rotor
Fig. 11.2:
Minimum and maximum radius of
an angle rotor
Version 03/2010, Rev. 1.7 of 27/01/2012
Translation of the original operating manual
2-16KC
Appendix
59