Maximum Speed For Tubes - Sigma 2-16KC Operating Manual

2-16KC
Appendix
Part no. Description
15054 Polycarbonate tube 42 ml, Ø 28.8 x 107 mm, incl. screw cap, suitable for 13079
15151 Culture tube Nunc, 50 ml, pointed bottom, polypropylene, incl. screw cap, suitable for
12151, 13150
15102 Polypropylene tube 120 ml, Ø 45 x 100 mm, suitable for 13097
15103 Polycarbonate tube 110 ml, Ø 45 x 100 mm, graduated 2 up to 100 ml in 2 ml increments,
suitable for 13097
Centrifuge Glass Tubes
15007 Centrifuge glass tube 6 ml, max. 4.000 x g, Ø 12 x 100 mm, suitable for 13004, 14029
15027 Centrifuge glass tube 7 ml, max. 4.000 x g, Ø 12 x 100 mm, graduated 1 up to 7 ml in
0.5 ml increments, suitable for 13004, 14029
15015 Centrifuge glass tube 10 - 12 ml, max. 4.000 x g, Ø 16 x 100 mm, suitable for 12072,
12073, 13012, 14030
15024 Centrifuge glass tube 12 ml, max. 4.000 x g, Ø 16 x 100 mm, graduated 0.1 ml up to
10 ml in 0.1 ml increments, suitable for 12072, 12073, 13012, 14030
15025 Centrifuge glass tube 26 ml, max. 4.000 x g, Ø 24 x 100 mm, suitable for 13022, 14031,
17925
15026 Centrifuge glass tube 27 ml, max. 4.000 x g, Ø 24 x 100 mm, graduated 2 up to 25 ml in
0.5 ml increments, suitable for 13022, 14031, 17925
15050 Centrifuge glass tube 58 ml, max. 4.000 x g, Ø 34 x 100 mm, suitable for 13047, 14032,
17950
15056 Centrifuge glass tube 58 ml, max. 4.000 x g, Ø 34 x 100 mm, graduated 2 up to 50 ml in
2 ml increments, suitable for 13047, 14032, 17950
15100 Centrifuge glass tube 100 ml, max. 4.000 x g, Ø 44 x 100 mm, suitable for 11190, 13097
15106 Centrifuge glass tube 97 ml, max. 4.000 x g, Ø 44 x 100 mm, graduated 1 up to 97 ml in
1 ml increments, suitable for 11190, 13097

11.2 Maximum speed for tubes

58
Further accessories available upon request.
Some tubes, such as centrifuge glass tubes, microtubes, culture
tubes, fluoropolymer tubes and especially high-volume tubes can be
used in our rotors, buckets, and adapterss at higher speeds than their
breaking limit.
Always fill the tubes up to their useful volume (= the volume that is
stated for the tube).
When using glass tubes, the maximum value of 4,000 x g must not
be exceeded (except special high-strengh glass tubes;please refer
to the information provided by the manufacturer).
Version 03/2010, Rev. 1.7 of 27/01/2012
Translation of the original operating manual