Table of Contents
Advertisement
2-16KC
Safety
3.7.4
Ground Wire Check
3.7.5
Imbalance Monitoring System
3.8
Measures in the Event of Hazards and Accidents
3.9
Remaining Hazards
20
For the ground wire check, there is an equipotential bonding screw on
the rear panel of the centrifuge. A ground wire check can be carried
out by authorized and specialized personnel using a suitable
measuring instrument. Please contact the head of our service team
(see 7.3 "Service Contact").
A dialog box may pop up or emit a sound signal in order to indcate
that the centrifuge is in the inadmissible imbalance range. If the rotor
is loaded unevenly, the drive will be switched off in the acceleration
phase or during the run.
If an emergency arises, switch off the centrifuge immediately!
If in doubt, call the emergency doctor!
The unit was built state-of-the-art and according to the accepted
safety rules. Danger to life and limb of the operator, or of third parties,
or impairments of the unit or other material assets cannot be
completely excluded when the unit is being used.
Use the unit
only for the purpose that it was originally intended for (see 1.2)
and
only if it is in a perfect running state.
Immediately eliminate any problems that can affect safety.
Version 03/2010, Rev. 1.7 of 27/01/2012
Translation of the original operating manual
Advertisement
Table of Contents
