Deleting A Program; Switching The Centrifuge Off - Sigma 2-16KC Operating Manual

6.3.4.3

Deleting a program

Fig. 6.26: Deleting a program
6.4

Switching the Centrifuge OFF

Version 03/2010, Rev. 1.7 of 27/01/2012
Translation of the original operating manual
Select the double arrow ( ) next to the program selection list and
confirm the selection. An overview with all of the programs that
have already been saved will be displayed.
Select the program that is to be deleted and confirm the selection.
A dialog box will be displayed.
Select "DELETE" and confirm the selection.
Open the centrifuge when it is not in use so moisture can
evaporate. This prevents the increased wear of the motor
bearings.
Press the mains power switch on the front of the right side.
2-16KC
Using the Centrifuge
41