YASKAWA SI-S3 Technical Manual page 23

Ac drive option canopen

Hide thumbs Also See for SI-S3:

Table of Contents

Note:

1. Only two screws are necessary to install the option on an FP605 drive.

2. The option package contains three screws and one ground wire.

A - Option

B - Included screw

Use one of the remaining included screws (B) to connect the ground wire (A) to the ground terminal and

installation hole on the option.

Tighten the screw to a correct tightening torque:

• 0.5 N∙m to 0.6 N∙m (4.4 lbf∙in to 5.3 lbf∙in)

Note:

Refer to

Figure 5.20

for instructions about crimp terminal orientation (C) and wire routing.

YASKAWA SIEP C730600 85D CANopen Technical Manual

C - Connector CN5

Figure 5.19 Install the Option

5 Installation Procedure

Table of Contents