YASKAWA SI-S3 Technical Manual page 12

5 Installation Procedure
NOTICE Damage to Equipment. When you touch the option, make sure that you observe correct electrostatic
discharge (ESD) procedures. If you do not follow procedures, it can cause ESD damage to the drive circuitry.
NOTICE
Damage to Equipment. Do not de-energize the drive while the drive is outputting voltage. Incorrect equipment
sequencing can cause damage to the drive.
NOTICE Do not operate a drive or connected equipment that has damaged or missing parts. You can cause damage to
the drive and connected equipment.
NOTICE
Use Yaskawa connection cables or recommended cables only. Incorrect cables can cause the drive or option
to function incorrectly.
NOTICE Damage to Equipment. Correctly connect the connectors. Incorrect connections can cause malfunction or
damage to the equipment.
NOTICE
Damage to Equipment. Make sure that all connections are correct after you install the drive and connecting
peripheral devices. Incorrect connections can cause damage to the option.
◆
Procedures to Install and Wire Options on a Drive
Procedures to install and wire the option are different for different drivel models.
Refer to the following table to check the procedures to install and wire the option on a drive.
Product Series
A1000
U1000
U1000L
Z1000U
GA500
GA700
GA800
FP605
*1 To install the option on GA500 drives, use the option mounting kit (JOHB-GA50) and manual.
■
Procedure A
This section shows the procedure to install and wire the option on a 1000-series drive.
Prepare the Drive for the Option
Correctly wire the drive as specified by the manual packaged with the drive. Make sure that the drive functions
correctly. Refer to the drive manuals for more information.
12
Table 5.1 Procedures to Install and Wire Options on a Drive
Procedures to Install and Wire Options on a Drive
Procedure A
Procedure A
Procedure A
Procedure A
*1
Procedure B
Procedure B
Procedure C
YASKAWA SIEP C730600 85D CANopen Technical Manual
Page
12
12
12
12
-
16
16
19