Table of Contents
Advertisement
The real time clock for time stamp of history values and log-
book continue operation, if batteries are exchanged without
delays. If Real Time Clock is set, actual time and date is dis-
played for 3 s (see chapter 2.4).
If correct timing information of logbook and history is re-
quired, the Real Time Clock should be set by means of the PC-
program.
To keep RTC running during battery exchange, batteries must
be exchanged without delays.
History data and measurement parameters are stored perma-
nently, even if batteries are removed.
RTC information is only required, if the instrument is
switched off and on during operation and if correct timing
information for history and logbook entries is needed.
For the last power on interval, the relative time information of
logbook and history is corrected to actual PC clock time dur-
ing read out. In these cases the setting of the clock is not re-
quired.
RadEye PRD-ER
DB-066 E
2-3
Iw/Tr/Ff 06.07.2015
Advertisement
Table of Contents
