neath the "polling interval" field to define the polling interval.
You can select a value between 1 and 3600 seconds.
The counter and the dose rate can be displayed numerically
and graphically. Click on the Graphics.... A diagram is dis-
played that gives a representation of the counter and dose rate
values versus the time.
The current measured value is added at the right-hand side,
and the diagram is shifted to the left. Up to 100 measured val-
ues can be represented. The graduation of the ordinate is au-
tomatically adjusted to the measured values supplied by the
unit.
Figure 6-2: Measurement graphics
RadEye PRD-ER
DB-066 E
6-5
Iw/Tr/Ff 06.07.2015