Use And Storage Conditions - LINET Image 3 B Instructions For Use And Technical Description

Test frequency (MHz)
385
450
710
745
780
810
870
930
1 720
1 845
1 970
2 450
5 240
5 500
5 785
NOTE There are applied no deviations to requirements of IEC 60601-1-2 ed. 4
NOTE There are no known other measures for keeping the basic safety based on EMC phenomena.
NOTE Beds equipped with communication module meet standard for IEEE 802.11 b/g/n (2400,0 MHz – 2483,5 MHz, modulation
DSSS (IEEE 802.11 b), OFDM (IEEE 802.11 g/n) 20MHz bandwidth, EIRP = 0,34 W).

7 Use and Storage Conditions

The bed may not be used and stored in indoor environments:
► Where there is a risk of explosion.
► Containing inflammable anaesthetics.
The bed is designed for use in rooms for medical purposes. Electrical installations must therefore meet local stan-dards laying
down the necessary conditions for electrical installations.
► Disconnect the bed from the mains in exceptional cases (i.e. lightnings, earthquake).
22
Table 1 - IMMUNITY to RF wireless communications equipment
Band (MHz)
380 - 390
430 - 470 GMRS 460, FRS 460
704 - 787 LTE band 13, 17
800 - 960 GSM 800/900, TETRA
800, iDEN 820, CDMA
1 700 - 1 990 GSM 1800; CDMA
1900; GSM 1900;
DECT; LTE band 1, 3,
2 400 - 2 570 Bluetooth, WLAN,
802.11 b/g/n, RFID
5 100 - 5 800 WLAN 802.11 a/n
Service Modulation
TETRA 400 Pulse modulation 18 Hz
FM ± 5 kHz deviation 1
Pulse modulation 217
Pulse modulation 18 Hz
850,
LTE band 5
Pulse modulation 217
4, 25; UMTS
Pulse modulation 217
2450,
LTE band 7
Pulse modulation 217
Immunity Test Level
kHz sine
Hz
Hz
Hz
Hz
D9U001AM2-0101_06
V/m
27
28
9
28
28
28
9